公司新聞
導致攤鋪機作業老是走偏的四個因素
來源：http://www.yuanchuodian.cn/ 日期：2023-01-28
攤鋪機是現代路面工程常見的施工設備之一，不過有些機友不明白自己的攤鋪機在施工中老是走偏，今天濟南攤鋪機出租廠家給大家簡要介紹一下，導致攤鋪機作業，老是走偏的四個因素。
The paver is one of the common construction equipment in modern pavement engineering. However, some users do not understand that their pavers always deviate during construction. Today, the rental manufacturer of Jinan paver briefly introduces the four factors that cause the paver to operate and always deviate.
攤鋪機操作技術因素
Technical factors of paver operation
人們常說欲善其功必先利其，但是再好的工具也不是可以自己就能把工作做完，就像千里馬也需要懂他還能夠很好駕馭它的騎手一樣，再好的攤鋪機，如果操作手沒有相關經驗，作業前不能根據現場需要把各個部件調整到位，在實際施工中臨時慌忙調整很難避免跑偏等問題的出現。
It is often said that if you want to do good work, you must make good use of it, but the best tool can't finish the work by itself. Just like the rider who also needs to understand and can control it well, the best paver, if the operator has no relevant experience, can't adjust all parts in place according to the needs of the site before operation, and it is difficult to avoid problems such as deviation in the actual construction.
攤鋪機電磁閥接線問題
Wiring problem of paver solenoid valve
熟悉攤鋪機的朋友都知道，攤鋪機行走很重要，攤鋪機使用時間一長，特別是二手攤鋪機，電磁閥接線很容易出現松動，如果一邊電磁閥接線出現問題和容易導致這一邊工作泵不能正常供電，這樣在攤鋪機施工作業中一邊正常另一邊不能同步很容易導致在施工中出現走偏。
Friends who are familiar with the paver know that the paver is very important to walk. As the paver has been used for a long time, especially for second-hand pavers, the solenoid valve wiring is easy to become loose. If there is a problem with the solenoid valve wiring on one side and it is easy to cause the working pump on the other side to be unable to supply power normally, this is easy to cause the deviation in the construction when one side is normal and the other side is not synchronized during the construction of the paver.
攤鋪機行走馬達缺油或出現異常磨損
The traveling motor of the paver is lack of oil or has abnormal wear
攤鋪機行走馬達就像我們的雙腳，如果因為缺油導致關節病，或因為長時間的使用導致行走馬達工作面或端面出現異常的嚴重磨損，就容易出現因馬達效率降低，而造成有問題的一邊動力輸出異常，從而產生施工作業中的跑偏。
The walking motor of the paver is like our feet. If the joint disease is caused by lack of oil, or the working face or end face of the walking motor is abnormally worn due to long time use, it is easy to cause abnormal power output of the problematic side due to the reduced efficiency of the motor, resulting in deviation during construction.
施工現場管理混亂
The construction site management is chaotic
糟糕的施工現場可能各有不同但是，科學規范的施工作業很多攤鋪機手都一定見過，現實施工中很多攤鋪機手很難有這樣理想的施工條件，天氣、現場車輛、路基作業面、現場人員和車輛配合和避讓都會導致施工中攤鋪機不能按照我們理想的路線前進而出現走偏。
Bad construction sites may be different. However, many pavers must have seen scientific and standardized construction operations. In reality, many pavers are hard to have such ideal construction conditions. Weather, on-site vehicles, subgrade working surface, on-site personnel and vehicle cooperation and avoidance will lead to pavers failing to move forward according to our ideal route and deviation during construction.
如果要求攤鋪機手每次都不出現一點走偏不是很現實，但是鋼甲天下二手工程機械以為，在施工前我們只要做好各項準備，在施工中多加注意施工現場的現場的指揮和配合就可以大大減少攤鋪機施工中的走偏。更多相關內容就來我們網站http://www.yuanchuodian.cn咨詢吧！
It is not very realistic to require that the paver hands do not deviate a little every time, but the second-hand construction machinery of Steel Jiatianxia believes that as long as we make all preparations before construction and pay more attention to the on-site command and cooperation during construction, we can greatly reduce the deviation of the paver during construction. Come to our website for more relevant content http://www.yuanchuodian.cn Ask!
公司地址：濟南市商河縣賈莊鎮民營經濟創業園
公司名稱:永誠廣建公路材料（山東）有限公司 
備案號：